Picture a family on a Sunday morning site visit, with two brochures spread on the kitchen counter. Both flats are 3 BHKs and both plans look neat and bright. Yet only one living room comfortably fits their sofa set and dining table. The difference is right there on the plan, if they know how to read it.
Knowing how to read a floor plan helps you compare flats before you book, while there is still time to choose. A plan shows room dimensions, walls, doors, windows and how the rooms connect. This guide explains each part in plain words, what to check for light and air, and what a brochure plan leaves out.
Key Takeaways
- Room sizes on a plan are usually inside measurements, in feet and inches.
- Thick lines are outer walls, thin lines are inner walls, and arcs show doors.
- Gujarat's building rules say a room's openings must be at least 1/7 of its floor area.
- Ask to see the sanctioned plan, because the brochure plan is a sales drawing.
What Does a Flat Floor Plan Show?
A floor plan is a drawing of your flat as seen from directly above, as if the roof were removed. It shows every room, its size, where the walls, doors and windows are, and how you move from one room to the next. It is the simplest way to compare two flats before construction is complete.
Most brochures show two kinds of plan. The first covers the whole floor, with every flat, the lift and the staircase, showing where your flat is located and which direction it faces. The second is the unit plan for one flat, which shows its rooms in detail.
Start with the unit plan, but do not skip the plan for the whole floor, because the position of a flat matters. One next to the lift may get more noise, while a corner flat often has windows on two sides. These details affect everyday living far more than the shape of a wardrobe.
How Do You Read Room Sizes on a Floor Plan?
Each room is marked with two numbers, such as 12'0" x 14'0". Usually the first is the width and the second the length, in feet and inches. Multiply the two dimensions to calculate the floor area of that room. A 12'0" x 14'0" bedroom is 168 square feet.
These sizes are usually measured from the inside face of one wall to the inside face of the opposite wall. So they represent the usable space inside each room. If a plan gives sizes in meters, multiply each side by 3.28 to get feet.
Room sizes also add up, roughly, to the flat's carpet area. The RERA Act defines carpet area as "the net usable floor area of an apartment". It excludes outer walls and balconies, but includes inner walls. Our guide to carpet area versus built-up area explains carpet area, built-up area and super built-up area in detail.
Here is a simple way to check whether a room size works for you:
- Measure your current bedroom, living room and kitchen at home.
- Write those sizes next to the matching rooms on the new plan.
- Check that your bed, wardrobe and sofa fit with room to walk around them.
- Look for rooms that are long and narrow, which are harder to furnish.
How Do You Read Walls, Doors and Windows on a Floor Plan?
Thick dark lines represent the outer walls, and thinner lines are the inner walls between rooms. A door is shown as a gap in the wall with a curved line, which shows which way it swings. Windows are shown as thin double or triple lines set into the wall.
Plans also use short labels. D marks a door and W a window, while V is a ventilator, the small high opening in a bathroom or kitchen. You may also see WC for a toilet and OTS for an open-to-sky shaft.
Check the door swings. A bedroom door that opens against the wardrobe, or a bathroom door that hits the basin, will annoy you every day. On a good plan, doors swing toward a wall and leave the room clear.
Look at how long the passage is too. A long passage uses up carpet area that you pay for but cannot furnish. A plan where rooms open off a compact central space usually wastes less.
How Can a Floor Plan Tell You About Light and Air?
Look at the position of the windows, the direction the flat faces and whether each room has an opening to the outside. A room with windows on two walls gets cross ventilation, which helps keep it cooler during an Ahmedabad summer. The north arrow on the plan helps you locate the western side, which gets the harsh afternoon sun.
Gujarat's building rules set a minimum. These are the state's development control rules of 2017, which builders call CGDCR. They say all doors, windows and ventilators in a room together "shall be minimum one-seventh of the floor area of the room." Part III of these rules is on the Ahmedabad Municipal Corporation website.
Bathrooms have their own rule. The same regulations say each bathroom needs "an opening of minimum 0.25 sq.mt.", roughly 2.7 sq ft, facing an open-to-sky space. On a plan, look for a small window or a ventilation shaft next to each bathroom. These are minimums. Where a room or bathroom falls short, the regulations require the deficiency to be made up with exhaust fans, blowers or air conditioning. A bright, airy flat usually goes well beyond them.
What Does a Brochure Floor Plan Leave Out?
A brochure plan is a sales drawing, made to show the layout clearly, so it leaves out some details that matter. It may show furniture to help you picture the rooms, and skip the columns, beams, AC ledges, shafts and ceiling height. Always ask for the sanctioned plan, which is the version approved by the authorities.
The law supports you here. Section 11(3)(a) of the RERA Act says that at booking, the builder must make available the "sanctioned plans, layout plans, along with specifications". And Section 14(1) says the project must be built "in accordance with the sanctioned plans, layout plans and specifications".
You can also look the project up on the GujRERA website, and our guide to checking a project's RERA registration shows how.
Ceiling height is a good example of something a brochure skips. Gujarat's rules say "All habitable spaces shall have minimum height of 2.9 mts between finished floor levels". That figure is measured floor to floor, so the clear height, from your floor up to the ceiling, is lower once the slab is counted. Ask the site team for the clear height of each room.
Look for columns too, because a column in the corner of a bedroom can obstruct a wardrobe or a bed. Ask which walls are structural and which ones could be modified later, before you plan any renovation.
How Do You Compare Two Floor Plans Side by Side?
Use the same checklist for both plans, comparing them room by room. Compare the living room, the bedrooms, the kitchen and the bathrooms, then look at wasted space and light. A larger total area does not always mean a better plan, because passages and awkward corners consume valuable space too.
| What to check | What a good plan shows | Watch for |
|---|---|---|
| Living and dining | Room for a sofa set and a dining table | A long passage running through it |
| Bedrooms | Space for a bed, a wardrobe and a walkway | Doors that swing into the wardrobe |
| Kitchen | A straight working platform and a utility area | No window or exhaust opening |
| Bathrooms | A window or shaft for fresh air | Doors that hit the basin |
| Light and air | Windows on two walls in main rooms | Rooms with one small window |
| Wasted space | Short passages | Odd corners and long corridors |
To take a made-up example, a family upgrading from a 2 BHK in Chandkheda compares two 3 BHK plans in October 2026. The larger plan has a long passage and a bedroom with one window. The smaller plan has two-sided windows and a bigger usable living room. After checking room by room, they choose the smaller plan. Our guide to 3 BHK versus 4 BHK flats covers the bigger choice of how many rooms you need.
Where to Start
Remember one thing when you read a floor plan: it shows how you will live in a flat, as well as how big it is. Read the room sizes, the walls and doors, and the windows before you look at anything else. Then ask to see the sanctioned plan.
This weekend, measure the main rooms in your current home and note the dimensions. Take that list on your next site visit, and compare each room on the new plan with the room you have now.
If you would like help, our team can walk you through the layouts at our ongoing projects. We will show you the approved plans too. Contact us to book a visit.
Frequently Asked Questions
They are the room's width and length, usually in feet and inches, measured between the inside faces of the walls. Multiply them to get the room's floor area. A 12'0" x 14'0" room is 168 square feet.
Not always. A brochure plan is a sales drawing and may show furniture or leave out columns and shafts. The RERA Act says the builder must make the sanctioned plans available, so ask to see them.
Count the windows in each room and check which way they face. Gujarat's building rules say a room's doors, windows and ventilators together must be at least one-seventh of its floor area.
Gujarat's building rules set a minimum of 2.9 meters between finished floor levels for habitable rooms. The clear height inside the room is lower, so ask the site team for the exact figure.
Not freely. Under Section 14 of the RERA Act, once the approved plans are shared with you, the builder needs your consent to change your flat's plan. Some minor changes, such as ones needed for structural reasons, can go ahead without consent, but the builder must tell you.


